Assigning An Msn; Entering Parameters For The Ringing Frequency, Flash Signal And Busy Tone - Tenovis Integral T3 User Manual

Analog-Link (T3 only)

Assigning an MSN

The analogue terminals connected via the Analog-Link can be assigned their own MSN:
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the respective menu item, e.g. Analogue Link Port 1 (if the Analog-Link has
been connected to port 1).
Confirm your selection.
Scroll to the MSN menu item.
Confirm your selection.
... Enter the call number for the analogue terminal.
Scroll to the Save entry menu item.
Confirm your selection.
• In the Use MSN menu you will still need to activate the MSN set up by selecting on.

Entering parameters for the ringing frequency, flash signal and busy tone

You can enter the parameters Ringing frequency, Flash signal and Busy tone for the analogue
terminal on your T3 telephone:
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the respective menu item, e.g. Analogue Link Port 1 (if the Analog-Link has
been connected to port 1).
Confirm your selection.
Scroll to the desired menu item, e.g. Dial frequency.
Confirm your selection.
Select the desired dialling frequency, e.g. 25 Hz.
Confirm your selection.
Links*
158