CTI-Link (T3 only)
CTI-Link (T3 only)
The "TAPI" CTI application is set on your telephone as a default. This means that you do not
need to make any further settings in order to run a TAPI application (e.g. Tenovis Com4Tel).
You have to proceed as follows however, if another CTI application has been connected:
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the respective menu item, e.g. CTI link Port 1 (if the CTI-Link has been con-
nected to port 1).
Confirm your selection.
Scroll to the CTI application (TAPI) menu item.
Confirm your selection.
Scroll to the Other CTI menu item.
Confirm your selection. You now have to use the "CTI setup" menu item to make additio-
nal settings for this CTI application, such as "Baud rate" or "Dialling mode".
Links*
154