Reactivating The Call Number And Charge Display; Cutting In On Another Call (Cut-In); Ending Cut-In; Using The T3 Telephone Outside The Company Network (Soho) - Tenovis Integral T3 User Manual

Making a call

Reactivating the call number and charge display

Select the Call display off/on menu item again.
Confirm your selection.

Cutting in on another call (cut-in)*

If you want to make a call with a subscriber whose line is busy:
Scroll to the Cut-in menu item.
Confirm your selection. All of the call parties hear a cut-in tone. You are now included in
the call and can communicate with the subscribers.
• Cutting in on a call is only possible within your system and must be enabled for your tele-
phone and the other telephone concerned. Consult your Tenovis Service if necessary.

Ending cut-in*

Scroll to the End cut-in menu item.
Confirm your selection.
• The cut-in call can also be ended by pressing the "Esc" key or by simply hanging up.

Using the T3 telephone outside the company network (SoHo)*

With your T3 Classic you can call via your company PBX system even from outside your com-
pany network.
For this to be possible, your telephone must be connected to the public ISDN network via an
ibus-k box. You also need to log your telephone onto the company system. This is done by
simply pressing a key.
All of the functions of your PBX system will then be able to be used via your telephone without
any restrictions.
Making calls as usual
30