Analog-Link (T3 only)
Analog-Link (T3 only)
The Analog-Link is not an analogue device connection. Only the basic features are provided:
refer-back, switching between lines, transferring, and message waiting.
Selecting a service
Your T3 telephone must be informed which analogue terminal is connected to the Analog-Link:
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the respective menu item, e.g. Analogue Link Port 1 (if the Analog-Link has
been connected to port 1).
Confirm your selection.
Scroll to the Service menu item.
Confirm your selection.
Select the desired service, e.g. Telephone.
Confirm your selection.
• You can connect any of the analogue devices available for selection if you select "all
svcs". You should however bear in mind that the connected device will also responds to
other services. A connected analogue telephone, for example, will ring if a fax call is
received.
Links*
157