Keys - Kyocera Mita WP31C Operation Manual

3.1 Understanding the Operator Panel
3.1.3

Keys

Note
The operator panel keys are used to configure the printer operation. Note that certain keys
have the secondary function.
The printer has a parallel, serial, and an optional network interface. Configuration to
the printer settings made with these keys affect only one of these interfaces that is
currently active (indicated by the INTERFACE indicator on the message display). See
Interface Indicator (INTERFACE) on page
GO Key
The GO key switches the printer between on-line and off-line. Use this key to:
• Toggle the printer's on-line and off-line states. You can temporarily stop the print job by switching
the printer off-line.
• Print and feed out one page when the printer displays Waiting.
• Recover from certain errors
CANCEL Key
This key is used to:
• Cancel a printing job
• Stop the alarm sound
• Reset numeric values or cancels a setting procedure while using menu system
To cancel a printing job:
1 1 1 1
While the printer displays Processing, press the CANCEL key.
Print Cancel? appears on the message display followed by the interface which
the job to cancel is on. The interface is indicated by one of the following message:
Parallel
USB
Network
Serial (option serial interface)
Option (option network interface)
2 2 2 2
Press the ENTER key. Cancelling data appears on the message display and
printing stops after the current page is printed.
3-3.
3-6