Auto Continue - Kyocera Mita FS-1800/N User Manual

>Auto Continue >
Mode
MENU
?
ENTER
ENTER
MENU
Auto Continue Setting
If an error that still allows you to continue printing occurs (Memory
overflow Press GO, Print overrun Press GO, KPDL error Press
GO, and File not found Press GO), the next received data is
automatically printed after a set period of time elapses. For example, if the
printer is shared over a network as a network printer and one person
causes one of the above errors, after the set period of time elapses, the data
sent from the next person is printed.
1
Press the MENU key.
2
Press the or
Others
3
Press the > key.
4
Press the or
>Auto Continue >
Mode On
5
Press the ENTER key. A blinking question mark (?) appears.
>Auto Continue >
Mode ? On
6
Select On or Off using the
7
Press the ENTER key.
8
Press the MENU key. The message display returns to Ready.
1-127
key repeatedly until Others > appears.
>
key repeatedly until Auto Continue > appears.
or key.
Using the Operator Panel