Resource Protection - Kyocera Mita FS-C8008DN Operation Manual

3.13 Other Modes

3.13.6 Resource Protection

Note
By default, when you switch from the PCL 6 emulation to another, all downloaded fonts and
macros will be lost. Resource protection preserves these PCL resources in memory so that
they remain intact even when you have switched back in PCL 6.
Resource protection requires extra memory to store the downloaded fonts and
macros. The total size of the printer memory recommended for using the resource
protection option is affected by several factors. See
By default, resource protection is deactivated. To activate resource protection, proceed as
follows:
1 1 1 1
Press the MENU key.
2 2 2 2
Press the or
Others
3 3 3 3
Press the key.
4 4 4 4
Press the or
>Resouce Prot.
Off
5 5 5 5
Press the ENTER key. A blinking question mark (?) appears.
>Resouce Prot.
? Off
6 6 6 6
Press the or
Temporary) for resource protection.
7 7 7 7
When the desired resource protection is displayed, press the ENTER key.
8 8 8 8
To exit the menu selection, press the MENU key.
key repeatedly until Others > appears.
>
key repeatedly until >Resource Prot. appears.
key to select Permanent or Perm / Temp (Permanent/
3-94
Appendix A Options.