Creating Custom Paper Type - Kyocera Mita FS-C5016N Operation Manual

3.10.9 Creating Custom Paper Type

The following describes the procedure used to set a user-defined paper type for the printer.
Eight custom user settings may be registered. After having been set, any of these may be
called up when setting the paper type for a paper source.
The paper weight and duplex path can be set (see
and Setting the Duplex Path on page
follows. For how to reset the customized settings, see
Paper Type on page 3-84.
1
Press the MENU key.
2
Press the or
Paper Handling >
3
Press the key.
4
Press the or
>Type Adjust
Custom 1
5
Press the ENTER key. A blinking question mark (?) appears.
>Type Adjust
? Custom 1
6
Press the or
shown below.
Custom 1 (to 8)
Plain
Transparency
Preprinted
Labels
Bond
Recycled
Vellum
Rough
Letterhead
Color
Prepunched
Envelope
Cardstock
Coated
Thick
High quality
7
When the paper type to be customized is displayed, press the ENTER key.
Setting the Paper Weight on page
3-83) after selecting the paper type to be customized as
key repeatedly until Paper Handling > appears.
key repeatedly until >Type Adjust > appears.
>
key to display the desired paper type. The display changes as
3-81
3.10 Paper Handling
section 3.10.10 Resetting the Custom
3-82,