Attendant Console Status - Cisco SPA301 Administration Manual

Cisco SPA IP Phone Field Reference

Attendant Console Status

Attendant Console Status
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
This page provides two tabs to display the status of up to two Cisco Attendant
Consoles that are supported by a single IP phone:
• Unit 1—Displays information about the first Cisco Attendant Console.
• Unit 2—Displays information about the second Cisco Attendant Console.
Each tab provides the read-only fields described in the following table:
Parameter
Unit Enable
Subscribe Expires
HW Version
Unit Online
Subscribe Retry Interval
SW Version
Key
Name
Type
Line
Station
Subscribed
Description
Indicates that the Cisco Attendant Console is
enabled or disabled.
When the current subscription expires. After the
subscription expires, the Cisco Attendant
Console automatically requests a new
subscription.
Version of the hardware.
Indicates that the Cisco Attendant Console is
powered on and connected.
Length of time the Cisco Attendant Console waits
to try again if subscription fails.
Version of the software.
Key number on the attendant console.
Name assigned to each key.
Function enabled for each key.
Extension assigned to each key.
Displays the subscribe URI configured for each
key.
Subscription status of the unit/key. The value can
be Yes, Fail, or N/A. N/A indicates that the feature/
function (fnc) of that line does not require a
subscription (such as a speed dial).
A
363