Xml Applications; Macro Variables - Cisco SPA301 Administration Manual

Customizing Standard Features
Configuring XML Services
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

XML Applications

When authentication is required for CGI/Execute URL via Post from external
application (Example: Web Application) to the SPA phones, the parameter, "CISCO
XML EXE Auth Mode" is used in 3 different scenarios:
• Trusted—No authentication is performed (local user password is set or not).
This is the default.
• Local Credential—Authentication based on digest authentication using
local user password, if the local user password is set. If not, no
authentication.
• Remote Credential—Authentication based on digest authentication using
remote username/password as set in XML application on Web Page (to
access XML application server).

Macro Variables

You can use macro variables in XML URLs. The following macro variables are
supported:
• User ID—UID1, UID2 to UIDn
• Display name—DISPLAYNAME1, DISPLAYNAME2 to DISPLAYNAMEn
• Auth ID—AUTHID1, AUTHID2 to AUTHIDn
• Proxy—PROXY1, PROXY2 to PROXYn
• MAC Address using lower case hex digits—MA
• Product Name—PN
• Product Series Number—PSN
• Serial Number—SERIAL_NUMBER
The following table shows the list of macros supported on the SPA phones:
3
105