Cisco SPA301 Administration Manual page 234

Cisco SPA IP Phone Field Reference
Info Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Cisco SPA525G or Cisco SPA525G2-Specific Parameters:
Parameter
NTP Enable
Primary NTP Server
Secondary NTP Server
TFTP Server
Bluetooth Enabled
Bluetooth Firmware
Version
Bluetooth Connected
Bluetooth MAC
Connected Device ID
Wireless Enabled
Wireless Connected
Wireless MAC
SSID
Standard Channel
Security Mode
Description
Shows if Network Time Protocol is enabled.
IP Address of the primary NTP server.
IP Address of the secondary NTP server.
Address of the TFTP server for provisioning.
Shows if Bluetooth is enabled.
Displays the Bluetooth firmware version.
Shows if a Bluetooth device is connected to the
phone.
Shows the hardware address of the Bluetooth
device.
Shows the name of the connected Bluetooth
device.
Shows if Wireless-G is enabled on the phone.
Shows if the phone is connected to the wireless
network.
Shows the hardware address of the Wireless-G
controller.
Shows the SSID, or name of the wireless router to
which the phone is connected.
Shows the wireless channel being used in the
wireless connection.
Shows if wireless security is configured on the
phone (yes or no).
A
234