Configuring The Lcd Contrast - Cisco SPA301 Administration Manual

Customizing Standard Features
Configuring Phone Information and Display Settings
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 1
STEP 2
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
• A blank power save screen."
Click Submit All Changes.
Cisco SPA525G or Cisco SPA525G2:
Click Admin Login > advanced > Voice > User.
Under Screen, in the Screen Saver Enable field, choose yes to enable.
In the Screen Saver Type field, choose the display type:
• Black Background—Displays a black screen.
• Gray Background—Displays a gray screen.
• Black/Gray Rotation—The screen incrementally cycles from black to gray.
• Picture Rotation—The screen rotates through available pictures on the
phone.
• Digital Frame—Shows the background picture.
In the Screen Saver Trigger Time field, enter the number of seconds that the phone
remains idle before the screen saver turns on.
In the Screen Saver Refresh Time field, enter the number of seconds before the
screen saver should refresh (if, for example, you chose a rotation of pictures).
Click Submit All Changes.

Configuring the LCD Contrast

You can configure the LCD contrast on the Cisco SPA300 Series and
Cisco SPA500 Series IP phones. (Not applicable to the Cisco WIP310.)
To configure the contrast for the IP phone screen on the phone:
Cisco SPA303 and Cisco SPA5XXG
Click Admin Login > advanced > User.
Under LCD, in the LCD Contrast field, enter a number value from 1 to 30. The higher
the number, the greater the contrast on the IP phone screen.
3
59