Configuring Toggling For Psks - Cisco SPA301 Administration Manual

Customizing Standard Features
Customizing Phone Softkeys
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Configuring Toggling for PSKs

You can configure PSKs to toggle, or switch between two PSK actions. This is
useful when you want a user to be able to switch between two star code actions
that have been defined for a PSK. For example, a PSK could be configured to
toggle between turning call forwarding on and off using the "call forwarding on"
star code (*72) and the "call forwarding off" star code (*73).
To configure this type of PSK, enter the following into the "PSK name" field in the
Voice > Phone tab in the management interface:
fnc=sd;ext=starcode@$PROXY;nme=name;ext2=starcode@PROXY;nme2=name2
where fnc=sd is the function of the key (speed dial), starcode is the star code
action to perform, name is the name of the first action, ext2 is the second star code
action to perform, and name2 is the name of the second action to perform. The
name field displays on the softkey on the IP phone screen. Cisco recommends a
maximum of 8 characters for a Cisco SPA30X or Cisco SPA50X phone and 10
characters for a Cisco SPA525G or Cisco SPA525G2 phone. If more characters
are used, the label can be truncated on the IP phone screen.
For example, to configure a call forwarding on/off PSK that displays on the far
lower left of the IP phone screen when the phone is idle:
Click Admin Login > advanced > Voice > Phone.
Under Programmable Softkey Enable, choose yes to enable.
In the Programmable Softkeys section, edit the following:
• PSK1: fnc=sd;ext=*72@$PROXY;nme=CFOn;ext2=*73@$PROXY;nme2=
CFOff;
• Idle Key List: Edit the field to add psk1|1 to the beginning of the string; for
example:
psk1|1;em_login;acd_login;acd_logout;avail;unavail;
redial;dir;cfwd;dnd;lcr;pickup;gpickup;unpark;em_logout;
Click Submit All Changes.
3
76