Initiating Pairing From Your Bluetooth-Enabled Mobile Phone - Cisco SPA301 Administration Manual

Customizing Standard Features
Configuring Bluetooth (Cisco SPA525G or Cisco SPA525G2 only)
STEP 6
STEP 7
STEP 8
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
• Both—Your Cisco SPA525G2 operates with your Bluetooth-enabled mobile
phone or operate with a Bluetooth headset. The Cisco SPA525G2 connects
to only one device at a time (either the Bluetooth headset or the Bluetooth-
enabled mobile phone.)
If multiple Bluetooth devices are in range of the Cisco SPA525G2, the order
of devices in the Bluetooth Configuration > Bluetooth Profiles list is used,
and the device with a higher priority is activated first.
Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile
screen.
Press Scan to scan for your mobile phone.
Depending on the network environment (such as the number of Bluetooth devices
and the noise level), your Bluetooth headset might not appear on the found
devices list. Ensure the headset is powered on and has Bluetooth activated, and
retry the Scan.
In the Select a Bluetooth Device to Pair list, select the mobile phone to which you
want to pair and press Connect.

Initiating Pairing from Your Bluetooth-Enabled Mobile Phone

The procedure varies depending on your phone model. The example in this
section uses an Apple iPhone.
Before starting, it is helpful to find the MAC address of your Cisco SPA525G2 IP
phone. From your IP phone, go to the Setup menu and select Status. Select
Product Information. The MAC address is displayed.
On your iPhone, click Settings.
Under General, choose Bluetooth. Ensure Bluetooth is turned on.
In the Bluetooth Window, under Devices, find the MAC address of your
Cisco SPA525G2 IP phone.
Select the MAC address of the Cisco SPA525G2.
Enter the PIN (the default is 0000) and press Connect.
3
91