Cisco SPA301 Administration Manual page 90

Customizing Standard Features
Configuring Bluetooth (Cisco SPA525G or Cisco SPA525G2 only)
STEP 3
STEP 4
STEP 5
STEP 6
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
NOTE
STEP 8
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Under Bluetooth Device List, press Scan for Bluetooth Devices.
In the Bluetooth Device List, click the name of the Bluetooth headset.
Enter the PIN for the Bluetooth headset.
Press Submit All Changes.
To enable a Bluetooth headset from the IP phone screen:
Enable Bluetooth as described in
Press the Setup button.
Scroll to User Preferences and press Select.
Scroll to Bluetooth Configuration and press Select.
Scroll to Bluetooth Mode and press the Right Arrow key to choose one of the
following:
• Phone—Configures a Cisco SPA525G2 with a Bluetooth-enabled mobile
phone. (The Cisco SPA525G pairs with headsets only; it does not pair with
mobile phones.)
• Both—The Cisco SPA525G2 uses a Bluetooth headset or operates with a
Bluetooth-enabled mobile phone (see
a Bluetooth-Enabled Mobile
only one device at a time (either a Bluetooth headset or a Bluetooth-enabled
mobile phone).
If multiple Bluetooth devices are in range of the Cisco SPA525G2, the order
of devices in the Bluetooth Configuration > Bluetooth Profiles list is used,
and the device with a higher priority is activated first.
Scroll to Bluetooth Profiles and press the Right Arrow key to enter the profile
screen.
Press Scan to scan for your headset.
Depending on the network environment (such as the number of Bluetooth devices
and noise level), your Bluetooth headset might not appear on the found devices list.
Ensure the headset is powered on and has Bluetooth activated, and retry the scan.
In the list of found devices, select your headset and press Select to edit the
profile.
"Enabling Bluetooth from the Web Interface."
Pairing Your Cisco SPA525G2 with
Phone). The Cisco SPA525G2 connects to
3
89