Cisco SPA301 Administration Manual page 304

Cisco SPA IP Phone Field Reference
Phone Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Call Appearance Per Line
Softkey Navigation Style
Description
This parameter allows you to choose the number
of calls per line button. You can choose a value
from 2 (the default) to 10.
When you increase the number of calls per line to
a value greater than 2, the phone automatically
sets the Line ID Mapping option to Horizontal
First. Changing the Line ID Mapping value has no
effect if the value of the Call Appearance Per Line
setting is greater than 2.
NOTE The maximum number of calls per an SPA525G
or 525G2 phone is 10. When the maximum numbers of
calls per phone is reached, the phone does not allow
you to make a new call and rejects incoming calls.
This parameter is not supported on the
Cisco SPA501G and Cisco SPA301 phones. Also,
this parameter is only supported when the
phones are operating in the SIP mode. In version
7.4.8a, only private call appearances are
supported. In versions 7.5. 1 a and higher private
and shared call appearances are supported.
If scrollable is chosen, users must use the
navigation button on the IP phone to scroll to see
the additional softkeys. If more is chosen, a
"More" softkey is displayed, which, when pressed,
displays the additional softkeys.
NOTE The Cisco SPA525G and Cisco SPA525G2
always display the "More" softkey when in an idle state.
A
304