Synchronization Of Do Not Disturb And Call Forward On A Per Line Basis (Applicable To Broadsoft) - Cisco SPA301 Administration Manual

Customizing Standard Features
Configuring BroadSoft Settings (Cisco SPA300 Series and Cisco SPA500 Series)
NOTE
NOTE
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
</paddrbook>
</flat-profile>
where:
name: name of the contact (max size: 64; input type: Any).
homePhone: home phone number of the contact (max size: 128; input type: Any).
workPhone: work phone number of the contact (max size: 128; input type: Any).
Not for SPA300 Series, SPA50X, and SPA51X phones.
mobilePhone: mobile phone number of the contact (max size: 128; input type: Any)
Not for SPA300 Series, SPA50X, and SPA51X phones.
ringToneID: ring tone for the contact, selection of available ring tones (input type:
numeric, 0-12).
For information on backing up the personal address book or call history see the
SPA Provisioning Guide.
Synchronization of Do Not Disturb and Call Forward on a Per
Line Basis (Applicable to BroadSoft)
Enabling synchronization of Do Not Disturb (DND) and Call Forward (CFWD) allows
the phone to synchronize with the call server (for example, the BroadSoft server)
so that if Do Not Disturb or Call Forwarding settings are changed on the phone,
changes are also made on the server; if changes are made on the server, they are
propagated to the phone. You can enable DND/CFWD per extension.
This feature is disabled by default.
Limitations:
• Cisco SPA301 or Cisco SPA501G—The softkey and phone menu settings
are not available.
• Cisco SPA509—Lines 9–12 cannot be set by using the SoftKeys or Menu
settings.
3
101