Viewing Attendant Console Status - Cisco SPA50X User Manual

Using the Phone Web User Interface

Viewing Attendant Console Status

Viewing Attendant Console Status
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide
The SPA500S or SPA500DS user parameters are displayed in the Attendant
Console Status window.
The table identifies and describes the values in the Attendant Console Status tab.
Parameter
Unit Enable
Unit Online
Subscribe
Expires
Subscribe Retry
Interval
HW Version
SW Version
Key
Name
Type
Line
Station
Subscribed
Description
Yes indicates the unit is enabled. No indicates it is disabled.
Yes indicates the unit is connected. No indicates it is not
connected.
Time in seconds when the current subscription expires.
After the subscription expires, the attendant console
automatically requests a new subscription.
Length of time the attendant console waits to try again if
the subscription fails.
Hardware version of the attendant console.
Firmware (software) version of the attendant console.
Name assigned to each key (1-32) on the Cisco SPA5000S
or key 1-30 on the Cisco SPA500DS.
Name identifying the entry.
Function (for example, speed dial) that is enabled for each
key on the attendant console.
Displays the extension assigned to each key on the
attendant console.
Subscribe URI (uniform resource identifier) configured for
each key on the attendant console.
Subscription status of the unit/key. The value can be Yes,
Fail, or N/A. N/A indicates that the feature/function (fnc) of
that line does not require a subscription (such as speed
dial).
5
73