Cisco SPA301 Administration Manual page 227

Configuring LED Patterns
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
The table shows the MWI LED pattern for the SPA301 phone in SIP mode:
Description
Temporary Ethernet link lost
Permanent Ethernet link lost (resulting in a reboot
when link is detected again) ) amber
Firmware downloading
Firmware upgrading
Phone registration failed
Call on hold
No response to a paging message
The table shows the MWI LED pattern for SPA IP phones in SCCP mode:
Description
Incoming call
Call on hold
Call active (off-hook)
The table shows the MWI LED pattern/status indicator for the SPA301 phone in
SCCP mode:
Description
Temporary Ethernet link lost
Permanent Ethernet link lost (resulting in a reboot
when link is detected again)
LED Pattern
Fast blink amber
Slow blink green
Solid green
LED Pattern
Heart-beat blink red
Heart-beat blink amber
Slow blink amber
Fast blink amber
Solid amber
Slow blink red
Fast blink green
LED Pattern
Heart-beat blink red
Heart-beat blink amber
9
227