Cisco SPA301 Administration Manual page 362

Cisco SPA IP Phone Field Reference
Attendant Console Tab (Cisco SPA500 and Cisco SPA500DS)
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
SNRM Night Mode LED
Parking Lot Idle LED
Parking Lot Busy LED
BLF Idle LED
BLF Ringing LED
BLF Busy LED
BLF Held LED
Description
(Used with Cisco UC320W.) The SNRM is turned
on. The system is in night mode.
These parameters are used to define the LED
pattern when the extension is in the parked state.
By default, when there is a call parked on the
monitored line (parking lot busy), the phone line
LED is in a very slow red blinking state (150ms on,
150ms off). When there is no call parked on the
monitored line (parking lot idle), the phone line
LED will be in off (or line idle) state. If the button is
the primary line, shared line or BLF line, the button
LED will reflect the current button status and not
reflect the Parking Lot Idle status if the parking lot
is idle. If the button is a call park button, the button
will reflect the Parking Lot Idle or Parking Lot Busy
statuses.
To define a pattern other than the default (slow
red blinking), enter a pattern in these fields. See
Chapter 9, "Configuring LED Patterns."
Busy lamp field service: the monitored phone or
line is in the idle state.
Busy lamp field service: the monitored phone or
line is in the ringing state.
Busy lamp field service: the monitored phone or
line is in the busy state.
Busy lamp field service: the monitored phone or
line is in the held state.
A
362