Configuring Basic Or Advanced Call Park Function To A Line Key - Cisco SPA301 Administration Manual

Configuring Lines

Configuring Basic or Advanced Call Park Function to a Line Key

STEP 4
STEP 5
Configuring Basic or Advanced Call Park Function to a Line
Key
NOTE
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
In the Call Progress Tones section under the Call Pickup Tone parameter.
The default value is 440@-10;30(.3/9.7/1), same as the call waiting tone.
To configure this parameter by using the configuration file, configure the following
line the profile:
<Call_Pickup_Tone ua="na">440@-10;30(.3/9.7/1)</Call_Pickup_Tone>
Click Submit All Changes.
Unused line keys can be enabled to allow call park (for the MetaSwitch soft
switch) on the Cisco SPA300 and SPA500 series phones. Users can press this line
button to park a call or retrieve a parked call.
Not available for WIP310, SPA501, SPA502, and SPA301 phones.
• BroadSoft Advanced Call Park and Recall Support, page 45
• MetaSwitch Call Park Function Support
For example to configure unused line keys for call park and retrieval on Cisco SPA
525G/SPA525G2 (MetaSwitch):
Click Admin Login > advanced > Voice > Att(endant) Console.
In the General section under Server Type, choose RFC3265_4236.
Click the Phone tab.
Choose the line key to configure (line 5 in this example):
a. From the Extension drop down list, choose Disabled.
b. From the Share Call Appearance drop-down list, choose private.
c. Enter the following string in the Extended Function field:
fnc=prk;sub=05@domain.com
2
52