Ext Status - Cisco SPA301 Administration Manual

Hide thumbs Also See for SPA301:
Table of Contents

Advertisement

Cisco SPA IP Phone Field Reference
Info Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
SIP Bytes Recv
External IP
Operational VLAN ID
SW Port (Cisco SPA300
Series and Cisco SPA500
Series)
PC Port (Cisco SPA303
and Cisco SPA500 Series)

Ext Status

The following parameters show for each extension on the phone.
Parameter
Registration State
Last Registration At
Next Registration In
Message Waiting
Mapped SIP Port
Description
Total number of bytes of SIP messages received
(including retransmissions).
External IP address used for NAT mapping.
ID of the VLAN currently in use if applicable.
NOTE
Not applicable to
Displays the type of Ethernet connection from the
IP phone to the switch.
Indicates whether the link from the IP phone to a
device plugged into the PC port on the phone is
up or down.
Description
Shows "Registered" if the phone is registered,
"Not Registered" if the phone is not registered to
the ITSP.
Last date and time the line was registered.
Number of seconds before the next registration
renewal.
Indicates whether the phone user has a new voice
mail waiting: Yes or No. This is updated when
voice mail notification is received.
Port number of the SIP port mapped by NAT.
Cisco WIP310
.
A
239

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents