Line Key - Cisco SPA301 Administration Manual

Cisco SPA IP Phone Field Reference
Phone Tab
NOTE
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide

Line Key

When used in the configuration profile, parameters in this section must be
n
appended with , where
these parameters, see
Does not apply to the Cisco WIP310.
Parameter
Extension
Short Name
Share Call Appearance
Extended Function
n
represents line 1, 2, 3, 4, 5 or 6. For more information on
Configuring Lines.
Description
Extension number of the line key.
A short label shown on the IP phone screen for
Line Key 1 through Line Key 6.
Yes indicates that Line Key 1/2/3/4/5/6 is a
shared call appearance. Otherwise this call
appearance is not shared (it is private).
Defaults to no.
Use to assign Busy Lamp Field, Call Pickup, and
Speed Dial Functions to Idle Lines on the IP
phone.
Syntax is:
fnc=type;sub=stationname@$PROXY;ext
=extension#@$PROXY
where:
• fnc: function
• blf: busy lamp field
• cp: call pickup
• sub: station name (not needed for speed
dial)
• ext or usr: extension or user (the usr and ext
keywords are interchangeable)
NOTE Not applicable to the Cisco WIP310,
Cisco SPA301, or Cisco SPA501G.
A
301