Unit; Attendant Console Status - Cisco Small Business SPA509G Administration Manual

Cisco SPA IP Phone Field Reference

Attendant Console Status

Attendant Console Status
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
BLF List URI
Unit 1 Key 1-32
Call Pickup Audio Notification
For more information, see
Attendant Console.".

Unit 2

See the description for Unit 1 above. Enter a strings that define the extension and
other parameters associated with each lighted button on the second Cisco
SPA500S unit. Keywords and values are case-sensitive. The configuration script is
described in the "Setting Up the Cisco SPA500S Attendant Console" section
on page 214.
This page provides two tabs to display the status of up to two Cisco SPA500S
units that are supported by a single IP phone:
• Unit 1—Displays information about the first Cisco SPA500S unit.
• Unit 2—Displays information about the second Cisco SPA500S unit.
Description
Automatically configures BLF subscriptions for all
users on a monitored list. See
Busy Lamp Field Auto-Configuration, page
Enter a strings that define the extension and other
parameters associated with each lighted button on the
first Cisco SPA500S unit. Keywords and values are
case-sensitive. The configuration script is described in
the "Unit/Key Configuration Scripts" section on
.
page 218
By default, this parameter is set to No. If you set it to
Yes, the phone plays the Call Pickup tone when there
are incoming calls to any of the lines that the user is
monitoring with the Call Pickup function.
Use the following in your configuration file:
<Call_Pickup_Audio_Notification ua="na">Yes
</Call_Pickup_Audio_Notification>
Chapter 9, "Configuring the Cisco SPA500S
B
Configuring BroadSoft
222.
324