Configuring The Vpn On The Security Appliance; Configuring The Vpn On The Cisco Spa525G Or Cisco Spa525G2 - Cisco SPA301 Administration Manual

Configuring Security, Quality, and Network Features
Configuring SSL VPN on the Cisco SPA525G or Cisco SPA525G2
STEP 1
STEP 2
STEP 3
STEP 4
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
3. Configure the VPN user settings using the phone web user interface or on the
IP phone by using the IP phone screen.

Configuring the VPN on the Security Appliance

This configuration is for example purposes. Specific configuration instructions are
not presented in this document. For detailed instructions for your particular device,
see the application notes in the
Download the Cisco AnyConnect VPN client software from Cisco.com and install it
on the VPN server.
Download a Cisco IOS version that supports this feature and install it on the VPN
server.
Configure SSL VPN on the VPN server.
Ensure the VPN is functional and you can connect to the VPN by using the
Cisco AnyConnect VPN client.
Configuring the VPN on the Cisco SPA525G or
Cisco SPA525G2
The phone obtains its software load from a TFTP server when the phone either
boots in SPCP mode (if the Connect on Bootup field on the phone is set to yes), or
connects to the VPN manually (as a result of a user pressing Connect on the phone
under the Network Configuration > VPN menu).
Administrator Settings
If the phone will be connecting to the VPN by using SPCP:
Navigate to Admin Login > advanced > Voice > System.
Under Optional Network Configuration, from the Alternate TFTP list choose yes.
In the TFTP Server field, enter the IP address of the Cisco Unified Communications
500 Series server.
Click Submit All Changes.
Cisco Small Business Support
5
Community.
168