Cisco SPA301 Administration Manual page 228

Configuring LED Patterns
STEP 1
STEP 2
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Description
Firmware downloading
Firmware upgrading
Incoming call
Incoming page call
Call holding
Call active (off-hook)
Message waiting
LED patterns can be customized for the line keys and attended console keys.
To configure Line Key LED patterns:
Click Admin Login > advanced > Voice > Phone
Under Line Key LED Pattern, configure the parameters to customize the Line Key
LED patterns with the LED script described in the following table:
Parameters
Idle LED
Remote Undefined
LED
Local Seized LED
Remote Seized LED
(applicable only to
shared call
appearance)
Description
The line is idle.
The Remote Undefined state pattern, where the shared
call state is undefined (the phone is still waiting for the
state information from the application server). Not
applicable if the call appearance is not shared. Leaving
this entry blank indicates the default value.
This phone seized the call appearance in preparation for
a new outbound call.
The shared call appearance was seized by another
phone.
LED Pattern
Slow blink amber
Fast blink amber
Fast blink red
Fast blink green
Slow blink green
Solid green
Solid red
9
228