Attendant Console Status - Cisco SPA 525G2 Administration Manual

Cisco SPA IP Phone Field Reference

Attendant Console Status

Attendant Console Status
Cisco Small Business SPA 300 Series, SPA 500 Series, and WIP310 IP Phone Administration Guide
This page provides two tabs to display the status of up to two Cisco SPA 500S
units that are supported by a single IP phone:
• Unit 1—Displays information about the first Cisco SPA 500S unit.
• Unit 2—Displays information about the second Cisco SPA 500S unit.
Each tab provides the read-only fields described in the following table:
Parameter
Unit Enable
Subscribe Expires
HW Version
Unit Online
Subscribe Retry Interval
SW Version
Key Name
Type
Line
Station
Description
Displays if the Unit is enabled or disabled.
Displays when the current subscription expires. After
the subscription expires, the Cisco SPA 500S
automatically requests a new subscription.
Displays the version of the hardware.
Displays whether the unit is powered on and
connected or not.
Displays the length of time the Cisco SPA 500S waits
to try again if subscription fails.
Displays the version of the software currently running
on the unit.
Displays the name assigned to each key (1-32) on the
Cisco SPA 500S unit.
Displays the function enabled for each key (1-32) on the
Cisco SPA 500S unit.
Displays the extension assigned to each key (1-32) on
the Cisco SPA 500S unit.
Displays the subscribe URI configured for each key (1-
32) on the Cisco SPA 500S unit.
B
294