Cisco SPA301 Administration Manual page 181

Provisioning
Updating Profiles and Firmware
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Parameter
Profile Rule
Profile Rule B
Profile Rule C
Profile Rule D
DHCP Option To Use
Transport Protocol
Log Resync Request Msg
Log Resync Success Msg
Log Resync Failure Msg
Report Rule
HTTP Report Method
User Configurable
Resync
Description
Remote configuration profile rules evaluated in
sequence. Each resync operation can retrieve
multiple files, potentially managed by different
servers.
DHCP options, delimited by commas, used to
retrieve firmware and profiles.
The transport protocol used to retrieve firmware
and profiles. If none is selected, TFTP is assumed
and the IP address of the TFTP server is obtained
from the DHCP server.
The message sent to the syslog server at the start
of a resync attempt. The default value is:
$PN $MAC –
Requesting resync $SCHEME://
$SERVIP:$PORT$PATH
The syslog message issued upon successful
completion of a resync attempt. The default value
is:
$PN $MAC –Successful resync $SCHEME://
$SERVIP:$PORT$PATH -- $ERR.
The syslog message that is issued after a failed
resync attempt. The default value is:
$PN $MAC – Resyncfailed: $ERR.
The device provides a mechanism for reporting its
current internal configuration to the provisioning
server. The URL in this field specifies the
destination for a report and can include an
encryption key.
The HTTP method used when the server invokes
the phone to send a configuration file report using
the HTTP protocol. Choose post or put.
Allows a user resynch the phone from the IP phone
screen.
6
181