Viewing Attendant Console Status - Cisco SPA501 User Manual

Using the Phone Web User Interface

Viewing Attendant Console Status

Viewing Attendant Console Status
Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide
The SPA500S user parameters are displayed in the Attendant Console Status
window.
The table identifies and describes the values in the Attendant Console Status tab.
Parameter
Unit Enable
Unit Online
Subscribe
Expires
Subscribe Retry
Interval
HW Version
SW Version
Key
Name
Type
Line
Station
Subscribed
Description
Yes indicates the unit is enabled. No indicates it is disabled.
Yes indicates the unit is connected. No indicates it is not
connected.
Time in seconds when the current subscription expires.
After the subscription expires, the Cisco SPA5000S
automatically requests a new subscription.
Length of time the Cisco SPA5000S waits to try again if the
subscription fails.
Hardware version of the attendant console.
Firmware (software) version of the attendant console.
Name assigned to each key (1-32) on the Cisco SPA5000S.
Name identifying the entry.
Function enabled for each key (1-32) on the
Cisco SPA5000S attendant console unit.
Displays the extension assigned to each key (1-32) on the
Cisco SPA5000S.
Subscribe URI (uniform resource identifier) configured for
each key (1-32) on the Cisco SPA5000S.
Subscription status of the unit/key. The value can be Yes,
Fail, or No. No indicates that the feature/function (fnc) of that
line does not require a subscription (such as speed dial).
5
73