Configuring The Screen Saver - Cisco SPA301 Administration Manual

Customizing Standard Features
Configuring Phone Information and Display Settings
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
By using a USB device attached to the phone:
On the USB device, make sure the image you want to use meets the size and
format requirements (see above), and is located in a folder named "pictures."
Insert the USB device into the phone and press the Setup button.
Choose User Preferences > Screen Preferences > Wallpaper.
Images on the USB device should display on the phone screen. Select the image
you want and then press Select.
Press Set and then Back to return to the previous screen.

Configuring the Screen Saver

You can configure a screen saver for the Cisco SPA300 Series and Cisco SPA500
Series IP phones. (Not applicable to Cisco WIP310 or the Cisco SPA501G.) When
the phone is idle for a specified time, it enters screen saver mode. (Users can set
up screen savers directly by using phone Setup button.)
Any button press or on/off hook event triggers the phone to return to normal mode.
If a user password is set, the user must enter it to exit screen saver mode.
To configure the screen saver:
Cisco SPA303 or Cisco SPA5XXG
Click Admin Login > advanced > Voice > Phone.
In the General section, in the Screen Saver Enable field, choose yes to enable.
In the Screen Saver Wait field, enter the number of seconds of idle time to elapse
before the screen saver starts.
In the Screen Saver Icon field, choose the display type:
• A background picture.
• The station time in the middle of the IP phone screen.
• A moving padlock icon. When the phone is locked, the status line displays a
scrolling message "Press any key to unlock your phone."
• A moving phone icon.
• The station date and time in the middle of the IP phone screen.
3
58