About This Manual - Fujitsu ETERNUS DX200 S3 Configuration Manual

Disk storage system
Hide thumbs Also See for ETERNUS DX200 S3:
Table of Contents

Advertisement

Fujitsu would like to thank you for purchasing our FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage
system.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system is designed to be connected to Fujitsu
(SPARC M10, PRIMEQUEST, or PRIMERGY) or non-Fujitsu servers.
This manual describes all the procedures that are required to start operation of the FUJITSU Storage ETERNUS
DX100 S3/DX200 S3 Disk storage system.
This manual is intended for use of FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system in re-
gions other than Japan.
Please carefully review the information outlined in this manual.

About This Manual

Organization
This manual is composed of the following eleven chapters:
"Chapter 1 Component Names" (page 18)
This chapter provides component names of the FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage
system.
"Chapter 2 Rack Installation" (page 26)
This chapter describes the procedure for installing the FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk
storage system in a rack.
"Chapter 3 Checking the Configuration Environment" (page 44)
This chapter describes the environment required for system configuration.
"Chapter 4 Connecting Cables" (page 54)
This chapter explains how to connect various cables to the FUJITSU Storage ETERNUS DX100 S3/DX200 S3
Disk storage system.
"Chapter 5 General Settings" (page 70)
This chapter describes the basic settings for the FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage
system.
"Chapter 6 Monitoring Settings" (page 101)
This chapter describes the settings required to monitor the FUJITSU Storage ETERNUS DX100 S3/DX200 S3
Disk storage system.
"Chapter 7 Power Control Setup" (page 121)
This chapter describes the settings required for power control of the FUJITSU Storage ETERNUS DX100 S3/
DX200 S3 Disk storage system.
"Chapter 8 SAN Connection Settings" (page 125)
This chapter describes the settings required to use the FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk
storage system with a SAN connection.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
3
Copyright 2014 FUJITSU LIMITED
Preface
Second Edition
February 2014
P3AM-7652-02ENZ0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Eternus dx100 s3

Table of Contents