Fujitsu ETERNUS DX200 S3 Configuration Manual page 37
Disk storage system
Hide thumbs
Also See for ETERNUS DX200 S3:
- User manual (1082 pages) ,
- Design manual (207 pages) ,
- Setup manual (129 pages)
Table of Contents
Advertisement
Chapter 2
Rack Installation
2.3
2.5" / 3.5" Type Drive Enclosure Installation (for Regions Other than EMEA&I)
4
Install the drive enclosure in the rack.
5
Fasten the drive enclosure in the rack.
Use four M5 screws to fasten it in the rack.
M5 screws
6
Attach the flange cover.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Do
When installing or removing the drive enclosure to or from the rack, make
•
sure that the sides and the bottom of the drive enclosure are held by two or
more people. Failure to do so may cause injury.
M5 screws
37
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
Advertisement
Table of Contents
