Monitoring Server (Snmp Manager) Settings - Fujitsu ETERNUS DX200 S3 Configuration Manual

Chapter 6 Monitoring Settings
6.5

Monitoring Server (SNMP Manager) Settings

• Enter the domain name or IP address of the syslog server in "Domain Name / IP Address".
(2)
Click the [Set] button.
A confirmation screen appears.
(3)
Click the [OK] button.
Setting of the audit log starts.
(4)
Check the setting completion message and click the [Done] button.
The screen display returns to the [Audit Log] screen.
6.5 Monitoring Server (SNMP Manager) Settings
Install and set up the monitoring software on the server side.
Refer to the manual for the monitoring software to install and set the monitoring software.
Register the file that was downloaded in "Download the MIB file"
(page 102) as the MIB definition file for the monitoring software.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
117
Copyright 2014 FUJITSU LIMITED
(Step 6) in "6.2.1 SNMP Trap Setup"
P3AM-7652-02ENZ0