Fujitsu ETERNUS DX200 S3 Configuration Manual page 158

Chapter 9 Advanced Copy Settings
9.1 Advanced Copy Basic Settings
Very Low Priority
•
This mode operates slower than the Low Priority mode.
Select this mode when performance is affected (such as when the performance of host response is
reduced) by the Automatic Priority or Low Priority mode.
4
In the confirmation screen, click the [OK] button.
EC/OPC priority setting starts.
5
In the setting completion screen, click the [Done] button.
The screen display returns to the [Setting (Advanced Copy)] screen.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
158
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0