Chapter 4
Connecting Cables
4.2
Drive Enclosure Connection
•
When two controllers are installed
Drive enclosure 2
Drive enclosure 1
Controller enclosure
(2)
Attach the destination labels to the connectors of the cables between enclosures.
Controller number" or "Drive enclosure number - IOM number" is printed on the destination labels
in the "Connection origin DI port g Connection destination DI port" format. The "n" or "l" symbol
is also printed on the destination labels.
Carefully check the connection origin and connection destination, and then attach the destination
labels.
DE01 0
C M 0 0
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Drive enclosure number
IOM (I/O module) number
CM (controller) number
59
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0