Fujitsu ETERNUS DX200 S3 Configuration Manual page 99

Chapter 5 General Settings
5.7 RAID Configuration Settings
4
Click the [Done] button.
The screen display returns to the [Drives] screen.
■
Dedicated Hot Spare Registration
The procedure to register a Dedicated Hot Spare is as follows:
1
Click the [Component] tab on the navigation of the ETERNUS Web GUI screen. On the [Component]
screen, click [Drives] in [Category].
The [Drives] screen appears.
2
Select the drive that is to be registered as the Dedicated Hot Spare and click [Assign Dedicated HS] in
[Action].
The [Assign Dedicated Hot Spare] screen appears.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
99
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0