Chapter 10
System Status Check
10.4
Checking Copy Sessions
10.4
Checking Copy Sessions
On the [Advanced Copy] screen, the status of the copy sessions that are set is displayed. Check if the copy
session status is normal.
To display the [Advanced Copy] screen, click the [Advanced Copy] tab on the navigation of the ETERNUS Web
GUI screen and click the number of sessions in [SnapOPC+ Sessions].
10.5
Checking LUNs
Check the LUN status from the server.
This section describes the check procedure using the ETERNUS Multipath Driver.
Click the [Start] button for Windows, expand [ETERNUS Multipath Driver] from [All Programs], and open
[ETERNUS Multipath Manager]. Check that the LUN status is normal (that the signal icon is blue).
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
171
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0