Fujitsu ETERNUS DX200 S3 Configuration Manual page 163

Chapter 9 Advanced Copy Settings
9.2 Performing a Copy (SnapOPC+)
4
Select the radio button of the volume that is to be used, and then click the [OK] button.
Select the "No.: 0, Name: main" volume.
5
In the same way as the copy source volume, click the [Browse] button of the copy destination volume.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
163
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0