E-Mail Setup - Fujitsu ETERNUS DX200 S3 Configuration Manual

Chapter 6 Monitoring Settings
6.2 Various Notification Settings
6.2.2

E-mail Setup

If an event occurs in the ETERNUS DX Disk storage system, the event information is reported to the specified
e-mail address.
• Up to five e-mail addresses can be set.
Make sure to check whether the e-mail messages are received correctly after the e-mail notification en-
•
vironment setup is complete.
E-mail messages are not sent again when a communication error occurs between the ETERNUS DX Disk
•
storage system and the SMTP server.
The e-mail setting is explained below.
1
On the navigation of the ETERNUS Web GUI screen, click [System].
The [System] screen appears.
2
In [Category], click [Network].
The [Network] screen appears.
3
In [Action], click [Setup E-Mail Notification].
The [Notification E-Mail] tab screen of the [Setup E-Mail Notification] screen appears.
4
In the [Notification E-Mail] tab screen, set the required items.
• Select "Yes" for "Notification E-Mail".
• Enter the destination e-mail address or addresses for the Destination E-Mail Address fields.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
109
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0