Fujitsu ETERNUS DX200 S3 Configuration Manual page 96

Chapter 5 General Settings
5.7 RAID Configuration Settings
The procedure to create a temporary work volume (SDPV) is as follows:
1
Click the [Volume] tab on the navigation of the ETERNUS Web GUI screen.
The [Volumes] screen appears.
2
In [Action], click [Create].
The [Create Volumes] screen appears.
3
Set the required items in the [Create Volumes] screen and click the [Create] button.
Name: sdpv
Capacity: 500GB
Type: Snap Data Pool Volume
RAID group/TPP setting: Manual
Manual setting: RG1
A confirmation screen appears.
4
Click the [OK] button.
The volume is created and the registration completion screen appears.
5
Click the [Done] button.
The screen display returns to the [Volumes] screen.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
96
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0