Switching On And Off The Psu Switch On The Power Supply Unit; Figure 5.5 On Position (Marked "|") Of The Main Line Switches On A 2U Power Distribution Unit; Figure 5.6 On Position (Marked "|") Of The Psu Switch On A Power Supply Unit - Fujitsu ETERNUS DX200 S3 Configuration Manual
Disk storage system
Hide thumbs
Also See for ETERNUS DX200 S3:
- User manual (1082 pages) ,
- Design manual (207 pages) ,
- Setup manual (129 pages)
Table of Contents
Advertisement
Chapter 5
General Settings
5.2
Powering On
●
For 2U
Figure 5.5 ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit
5.2.2
Switching On and Off the PSU Switch on the Power Supply Unit
Move the PSU switches of the power supply unit in the controller enclosure and the 2.5" / 3.5" type drive en-
closures to the ON position (marked "|"). Note that power supply units for high-density drive enclosures do
not have PSU switches.
Make sure all of the PSU switches are in the ON position.
Figure 5.6 ON Position (Marked "|") of the PSU Switch on a Power Supply Unit
Power supply unit (PSU#0)
AC power is supplied to an enclosure.
For the controller enclosure, the POWER LED on the power supply unit blinks green.
•
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Main line switch
Power supply unit (PSU#1)
74
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0
Advertisement
Table of Contents
