Fujitsu ETERNUS DX200 S3 Configuration Manual page 80

Chapter 5 General Settings
5.4 Storage Management (Initial Setup 1)
(2)
Click the [OK] button.
The password is changed and the change completion screen appears.
(3)
Click the [Done] button.
The [Set Thin Provisioning] screen appears.
4
Set the Thin Provisioning.
Enable or disable the Thin Provisioning function and set the maximum pool capacity.
(1)
Set the required items and click the [Next >>] button.
A confirmation screen appears.
(2)
Click the [OK] button.
The Thin Provisioning is set and the change completion screen appears.
(3)
Click the [Done] button.
The [Register Advanced Copy License] screen appears.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
80
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0