Fujitsu ETERNUS DX200 S3 Configuration Manual page 107

Chapter 6 Monitoring Settings
6.2 Various Notification Settings
(3)
Select the Manager No. that was set in
the [OK] button.
The screen display returns to the trap list of the [Setup SNMP Agent Trap] screen.
(4)
Check the trap that was set in
A confirmation screen appears.
(5)
Click the [OK] button.
The SNMP Trap settings are applied.
(6)
Check the setting completion message and click the [Done] button.
The screen display returns to the [Network] screen.
6
Download the MIB file.
Download the MIB file that is registered in the ETERNUS DX Disk storage system.
(1)
In [Action], click [Download MIB File].
The [Download MIB File] screen appears.
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
Step 3 for [Manager No.], set the required items, and click
Step (3) is added in the trap list and click the [Set] button.
107
Copyright 2014 FUJITSU LIMITED
P3AM-7652-02ENZ0