Rear; Figure 1.7 Front View Of A High-Density Drive Enclosure; Figure 1.8 Rear Views Of A Drive Enclosure (When Only One I/O Module Is Installed) - Fujitsu ETERNUS DX200 S3 Configuration Manual

Chapter 1 Component Names
1.2 Drive Enclosures
■
High-density Drive Enclosure

Figure 1.7 Front View of a High-density Drive Enclosure

1
1. Operation panel
2. Disk Activity Panel (DAP)
3. Front cover
1.2.2

Rear

This section provides the names of the components in the rear of a drive enclosure.
■
2.5" Type / 3.5" Type
When only one I/O module is installed
•

Figure 1.8 Rear Views of a Drive Enclosure (When Only One I/O Module is Installed)

3
1. I/O module (IOM#0)
2. Cover
3. Drive interface (IN) port
4. Drive interface (OUT) port
5. Power supply unit (PSU#0)
6. Power supply unit (PSU#1)
FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage system Configuration Guide (Basic)
1
4
5
Copyright 2014 FUJITSU LIMITED
2 3
2
6
22
P3AM-7652-02ENZ0