Removing A Cd Or Dvd Drive; Installing A Cd Or Dvd Drive - IBM xSeries 306m Problem Determination And Service Manual

Removing a CD or DVD drive

To remove the CD or DVD drive, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and peripheral devices, and disconnect the power cords and
3. Press the release tab (the rear of the drive-retention clip) toward the drive to
4. Remove the retention clip from the drive.
5. If you are instructed to return the CD or DVD drive, follow all packaging

Installing a CD or DVD drive

To install the replacement CD or DVD drive, compete the following steps:
1. Follow the instructions that come with the drive to set any jumpers or switches.
44
IBM xSeries 306m Types 8849 and 8491: Problem Determination and Service Guide
on page 27.
all external cables. Remove the cover (see "Removing the cover" on page 30).
release the clip; then, while pressing the tab, pull the drive out of the bay.
Note: You might have to push the right-rear corner of the drive toward the front
of the server to move the drive initially.
instructions, and use any packaging materials for shipping that are supplied to
you.