13.1.8 Concluding steps
Perform the following procedures to complete the task:
Ê Insert the HDD cage as described in
Ê Install the front cover as described in section
page
53.
Ê Install accessible drives as described in section
on page
237.
Ê Close the side cover as described in section
page
58.
Ê Reconnect the AC power cord to the power supply unit and secure it with a
cable tie as described in section
page
59.
Ê If BitLocker functionality is used and has been disabled before starting the
maintenance task, re-enable BitLocker as described in section
BitLocker functionality" on page
TX100 S3
"Connecting the server to the mains" on
82.
Upgrade and Maintenance Manual
Front panel and external connectors
"Installing the HDD cage" on page
"Installing the front cover" on
"Installing accessible drives"
"Installing the side cover" on
63.
"Enabling
279