Onboard Settings - Fujitsu PRIMERGY TX100 S3 Maintenance Manual

16.3.1.2 Onboard settings

POWER1
Figure 238: Jumper
Setting
Default
PWD Skip
RCVR
When the CMOS battery is removed from a system board, the password set by
customers is kept and also other CMOS settings are restored except date/time.
TX100 S3
POWER
DIMM1B
DIMM2B
Temp. Sensor
DIMM1A
DIMM2A
Description
Password skip disabled and recovery BIOS disabled.
Password skip enabled.
The password is deleted and the default BIOS settings are
applied after "PWD Skip" jumper was set once.
Recovery BIOS enabled.
Use this function only if the system BIOS is destroyed.
After flashing a new Recovery BIOS from a memory stick
the password and all configuration settings are set to
default.
Upgrade and Maintenance Manual
SATA
PWR
Pin 2
PWD Skip
Appendix
Pin 2 Pin 1
Default
Pin 2 Pin 1
Pin 1
RCVR
343