Removing The Tpm - Fujitsu PRIMERGY TX100 S3 Maintenance Manual

Ê Set the TPM Support and TPM State settings to Enabled.
Ê Under Pending TPM operation, select the desired TPM operation mode.
Ê Save your changes and exit the BIOS.
I
For detailed information on how to access the BIOS and modify
settings, refer to the "System Board D3009 BIOS Setup Utility"
reference manual available online at
(EMEA market) or
(Japanese market) or from the ServerView Suite DVD 2 supplied with
your PRIMERGY server.

14.2.2 Removing the TPM

Field Replaceable Units (FRU)
Average task duration: 30 minutes
V
CAUTION!
Advise your contact persons that they must provide you with TPM
backup copies. For security reasons, the TPM must be restored/re-
saved by the customer. After installing a new system board, the TPM
must be enabled. You may not clear the TPM data.
If the contact persons DO NOT have a backup copy available, inform
them that replacing the TPM will cause to lose all data.
TX100 S3
http://jp.fujitsu.com/platform/server/primergy/manual/
Upgrade and Maintenance Manual
System board and components
http://manuals.ts.fujitsu.com
297