Main memory
10.2
Installing memory modules
Upgrade and Repair Units (URU)
Average task duration: 5 minutes
10.2.1 Required tools
Preliminary and concluding steps: tool-less
●
Installing memory modules: tool-less
●
10.2.2 Preliminary steps
Before installing a memory module, perform the following steps:
Ê Disable BitLocker functionality as described in section
functionality" on page
Ê Shut down the server as described in section
page
42.
Ê Remove the AC power cord from the cable tie and disconnect it from the
system as described in section
Ê Bring the server to its horizontal position.
Ê Open the side cover as described in section
page
45.
204
69.
"Disconnecting power cord" on page
Upgrade and Maintenance Manual
"Disabling BitLocker
"Shutting down the server" on
"Removing the side cover" on
43.
TX100 S3