Fujitsu PRIMERGY TX100 S3 Maintenance Manual page 6

Contents
4.3.2.1 Removing the optical disk drive (ODD) . . . . . . . . . . . . 47
4.3.2.2 Removing the backup drive . . . . . . . . . . . . . . . . . . 49
4.3.3 Removing the front cover . . . . . . . . . . . . . . . . . . . . . 51
4.4 Closing the server . . . . . . . . . . . . . . . . . . . . . . . . 52
4.4.1 Installing the front cover
4.4.2 Installing the optical disk drive (ODD)
4.4.3 Installing the backup drive . . . . . . . . . . . . . . . . . . . . 56
4.4.4 Installing the side cover . . . . . . . . . . . . . . . . . . . . . . 58
4.5 Connecting the server to the mains . . . . . . . . . . . . . . 59
4.6 Switching on the server . . . . . . . . . . . . . . . . . . . . . 60
4.7 Removing the HDD cage . . . . . . . . . . . . . . . . . . . . 61
4.7.1 Preliminary steps . . . . . . . . . . . . . . . . . . . . . . . . . 61
4.8 Installing the HDD cage . . . . . . . . . . . . . . . . . . . . . 63
4.8.1 Concluding steps . . . . . . . . . . . . . . . . . . . . . . . . . 66
4.9 Concluding software tasks . . . . . . . . . . . . . . . . . . . 67
5 Basic software procedures . . . . . . . . . . . . . . . . . . . 69
5.1 Starting the maintenance task . . . . . . . . . . . . . . . . . 69
5.1.1 Disabling BitLocker functionality . . . . . . . . . . . . . . . . . 69
5.1.2 Removing backup and optical disk media . . . . . . . . . . . . 70
5.1.3 Verifying and configuring the backup software solution . . . . . . 71
5.1.4 Note on server maintenance in a Multipath I/O environment . . . 71
5.2 Completing the maintenance task . . . . . . . . . . . . . . . 73
5.2.1 Updating the system board BIOS . . . . . . . . . . . . . . . . . 73
5.2.2 Updating RAID controller firmware . . . . . . . . . . . . . . . . 75
5.2.3 Enabling Option ROM scan . . . . . . . . . . . . . . . . . . . . 76
5.2.4 Verifying and configuring the backup software solution . . . . . . 77
5.2.5 Enabling replaced components in the system BIOS . . . . . . . 78
5.2.6 Verifying the system time settings . . . . . . . . . . . . . . . . 78
5.2.7 Viewing and clearing the System Event Log (SEL) . . . . . . . . 79
5.2.7.1 Viewing the SEL . . . . . . . . . . . . . . . . . . . . . . . . 79
5.2.8 Updating the NIC configuration file in a Linux environment . . . . 80
5.2.9 Enabling BitLocker functionality . . . . . . . . . . . . . . . . . . 82
5.2.10 Performing a RAID array rebuild . . . . . . . . . . . . . . . . . 83
5.2.11 Looking up changed MAC / WWN addresses . . . . . . . . . . 83
5.2.11.1 Looking up MAC addresses . . . . . . . . . . . . . . . . . . 83
5.2.12 Using the Chassis ID Prom Tool . . . . . . . . . . . . . . . . . 84
. . . . . . . . . . . . . . . . . . . . . 53
Upgrade and Maintenance Manual
. . . . . . . . . . . . . . 54
TX100 S3